Product Declassification and Security Product Name: 10 MHZ TO 7 GHZ SIGNAL SOURCE ANALYZER
Model Number(s): E5052B
Page 2 of 10
Contacting Keysight Sales and Service Offices
Assistance with test and measurements needs and information on finding a local Keysight
office is available on the internet at, http://www.Keysight.com/find/assist. If you do not
have access to the internet, please contact your field engineer.
Note: In any correspondence or telephone conversation, refer to the signal source
analyzer by its model number and full serial number. With this information, the Keysight
representative can determine whether your unit is still within its warranty period.
Product Declassification and Security
Model Number(s): E5052B
Product Name: 10 MHZ TO 7 GHZ SIGNAL SOURCE ANALYZER
This document describes instrument security features and the steps to declassify an
instrument through memory sanitization or removal. For additional information please go
to www.keysight.com/find/ad and click on the security instrument tab.
Table of Contents
Terms and Definitions.……………………………………………......3
Instrument Memory………………………………………………...…4
Memory Clearing, Sanitization and/or Removal…………………...…6
User and Remote Interface Security ………...……………….…….…9
Procedure for Declassifying a Faulty Instrument……………..….…...10
To Next Page
Loading...
Need help?
General
