05 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide
Compatibility
Power sensor compatibility
For compatibility of power meters, power sensors, and power sensor cables, please refer to the
table below.
Firmware compatibility
Firmware upgrade information can be accessed from the World Wide Web, free of charge.
Calibration Options
– E441xA/B-A6J - Supplies ANSI Z540 certificate of calibration with data.
– E441xA/B-1A7 - Supplies ISO 17025 certificate of calibration with data.
– N1913/ 4A-A6J - Supplies ANSI Z540 certificate of calibration with data.
– N1913/ 4A-1A7 - Supplies ISO 17025 certificate of calibration with data.
– E93xxA/B/H-A6J - Supplies ANSI Z540 certificate of calibration with data.
Power sensors Power meters Power sensor cables
EPM-P Series EPM Series 11730 (grey) E9288 (blue)
E441x family Yes Yes Yes Yes
E9300 family Yes Yes Yes Yes
E9320 family Yes No No Yes
8480 Series Yes Yes Yes Yes
N8480 Series Yes Yes Yes Yes
U8480, U2000 and
U2040 Series (except
U2049X and in Average
Mode only)
No Yes Not applicable Not applicable
To Next Page
Loading...
Need help?
General
