03 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide
EPM-P Series Power Meters
The EPM-P Series power meters provide peak, peak-to-average ratio, average, and time-gated
power measurements. For peak, peak-to-average ratio, and time-gated measurements, the
EPM-P Series power meters must operate with the E-Series E9320 power sensors. For average
power measurements only, the EPM-P Series power meters are compatible with all the 8480
Series power sensors, the E-Series CW, the E-Series E9300 average power sensors, and the
E-Series E9320 power sensors.
The standard E4416A and E4417A power meters include:
– Single-channel power meter, order E4416A or dual-channel power meter, order E4417A
– Input sensor connector(s) on the front panel
– Reference calibrator connector on the front panel
– Power sensor cable, 1.5 m (5 ft). (One per E4416A, two per E4417A)
– Libraries Media Suite CD-ROM
– Documentation CD-ROM
– Power cord (plug matches destination requirements)
EPM Series Power Meters
The EPM Series power meters provide average power measurements.
The standard N1913A and N1914A power meters include:
– Single-channel power meter, order N1913A or dual-channel power meter, order N1914A
– Input sensor connector(s) on the front panel
– Reference calibrator connector on the front panel
– Power sensor cable, 1.5 m (5 ft) (One per N1913A, two per N1914A)
– USB cable Type A to Mini-B, 6 ft
– Documentation CD-ROM
– Keysight Instrument Control DVD
– IO Libraries Suite
– Command Expert
– BenchVue Software Platform
– 30-day free trial of BenchVue Power Meter/Sensor Control and Analysis app
– Standard Calibration of Certificate
– Power cord (plug matches destination requirements)
To Next Page