Keysight Technologies FieldFox A Series User Manual

320 Keysight N9927-90001 User’s Guide
Over–the–Air Measurements (OTA) – LTE FDD Option 370 and 5GTF Option 377 (CPU2
Only)
How to Set Up EMF Settings (Requires EMF (Option 358))
6. Verify EMF in 5G NR Mode:
a. Press Mode
> OTA > 5G NR then
b. Press Meas Setup 4
> More > EMF > dBuV/m
(i.e., For this example. Other units are selectable.)
For more information:
— Refer to Figure 12-20 on page 320.
— See also “Utilities” on page 630.
Figure 12-20 Example Summing of Triaxial Values

Keysight Technologies FieldFox A Series Specifications

General

Brand	Keysight Technologies
Model	FieldFox A Series
Category	Measuring Instruments
Language	English