Keysight Technologies FieldFox A Series User Manual

670 Keysight N9927-90001 User’s Guide
Using the Mini-USB Port to send SCPI Commands and Queries (N995xA/6xA and
applies to: N991xA/2xA/3xA units with serial number prefixes ≥5607)
Mini-USB Connection to PC with IO Libraries
—In the Keysight Interactive IO window: Type in your SCPIs on the Command
line and click Send Command, Read Response, or Send & Read. Refer to
the Keysight Connection Expert Help and Figure 30-1 on page 670.
Figure 30-1 Keysight Interactive IO Window

Keysight Technologies FieldFox A Series Specifications

General

Brand	Keysight Technologies
Model	FieldFox A Series
Category	Measuring Instruments
Language	English