Synchronization Operation 110
Programming Output Lists 111
Output Lists 111
Program an Output Pulse or Pulse Train 112
Program an Arbitrary List 114
Generating Arbitrary Waveforms 117
Arbitrary Waveform Description 117
Configuring Step Arbs 118
Configuring Pulse Arbs 118
Configuring Ramp Arbs 119
Configuring Trapezoid Arbs 120
Configuring Staircase Arbs 121
Configuring Exponential Arbs 122
Configuring Sinusoid Arbs 122
Configuring Constant-Dwell Arbs 123
Configuring an Arb Sequence 124
Configuring User-Defined Arbs 126
Configuring Steps Common to all Arbs 126
Running the Arb 127
Making Measurements 129
Basic DC Measurements 129
Measurement Ranges 129
Seamless Measurements 130
Simultaneous Measurements 130
Auxiliary Voltage Measurements 130
Using the Digitizer 132
Measurement Types 132
Programming the Digitizer 133
Synchronizing Digitizer Measurements 137
External Data Logging 142
Data Logging Functions 142
Select the Measurement Function and Range 142
Specify the Integration Period 143
Select the Elog Trigger Source 144
Initiate and Trigger the Elog 145
Periodically Retrieve the Data 145
Terminate the Elog 146
Using the Digital Control Port 147
Bi-directional Digital IO 147
Digital Input 148
External Trigger I/O 148
Fault Output 149
Inhibit Input 149
Fault/Inhibit System Protection 150
Output State 151
Using the Protection Functions 152
Protection Functions 152
Set the Over-Voltage Protection 153
5 Keysight N6700C Series User's Guide
To Next Page
Loading...
