Need help?Do you have a question about the Keysight 34460A and is the answer not in the manual?
General| Model | 34460A |
|---|---|
| Category | Digital Multimeter |
| Manufacturer | Keysight Technologies |
| Digits | 6.5 |
| DC Voltage Range | 100 mV to 1000 V |
| DC Voltage Accuracy | 0.0035 % + 0.0005 % of range |
| AC Voltage Range | 100 mV to 750 V |
| Resistance Range | 100 Ω to 100 MΩ |
| Frequency Range | 3 Hz to 300 kHz |
| AC Voltage Accuracy | 0.06% + 0.03% of range |
| Resistance Accuracy | 0.01% + 1 |
| Interface | USB, LAN |
Defines CAUTION and WARNING notices and their implications.
General safety precautions for product usage.
General information on avoiding damage and electric shock by not exceeding limits.
Procedures for service, troubleshooting, and replacement parts.
Procedures for verifying instrument performance.
Steps for performing instrument calibration and adjustment.
Instructions for configuring remote interfaces like GPIB, USB, and LAN.
Procedure for setting line voltage and installing fuses.
Lists the common measurements supported by Truevolt DMMs.
Configuration steps for DC voltage measurements, including DCV ratio.
Configuration steps for AC voltage measurements, including filters and settling time.
Configuration steps for DC current measurements, including terminal selection.
Configuration steps for AC current measurements, including terminal selection and filters.
Configuration steps for 2-wire and 4-wire resistance measurements.
Configuration steps for 2-wire and 4-wire temperature measurements for specific models.
Information on data logging mode, including sample interval and duration.
Explanation of the digitizing feature and its setup.
Comprehensive list of SCPI error codes and their meanings.
Guidelines to prevent ESD damage during service operations.
General guidance for troubleshooting instrument issues.
Procedures to reset the security code if forgotten.
Specific calibration steps for 34460A and 34461A models.
Procedure for calibrating the ADC and performing zero offset corrections.
Specific calibration steps for 34465A and 34470A models.
To Next Page