Keysight CX3300 Series - Page 23

Tips: By using the Scale Reference function, you can change the base point of the Zoom.
- Utilities > Configuration > User Preference > Scale Reference
Utilities
1
2
3
4
[ Scale Reference > Horizontal Sample
]
0 s 4 ms
[ “Timebase” selected ]
4 ms
[ “0 s” selected ]
0. s
Stretch around 0 s
Stretch around the timebase center
Note:
- The setting is also retained in CX3300
power cycle and [Default Setup].
- It returns to the factory condition with
[Factory Default]
1
.
1. [Factory Default] can be selected on the “Utilities >
Configuration > Setups” window.
23