Need help?Do you have a question about the Keysight N6705C and is the answer not in the manual?
General| Model | N6705C |
|---|---|
| Category | DC Power Analyzer |
| Number of Slots | 4 |
| Maximum DC Power per Module | 300 W |
| Data Logging | Yes |
| Data Logging Rate | Up to 50, 000 readings/second |
| Type | Modular |
| Voltage Range | Up to 60 V |
| Current Range | Varies by module. Up to 50 A |
| Power per Output | Up to 300 W |
| Voltage Resolution | Up to 100 µV |
| Voltage Programming Accuracy | 0.03% + 10 mV |
| Voltage Measurement Accuracy | 0.03% + 10 mV |
| Ripple and Noise (20 Hz to 20 MHz) | 2 mVpp (typical) |
| Measurement Capabilities | Voltage, Current, Power |
| Display | Color |
| Interface | GPIB, LAN, USB |
| Connectivity | Ethernet, USB |
General safety precautions for operating the instrument, including warnings for environmental conditions and grounding.
Overview of the N6705 DC Power Analyzer's features, functions, and views.
A reference of SCPI commands for controlling instrument functions like abort, calibrate, and display.
Information on checking supplied items, inspecting the unit, reviewing safety, and observing environmental conditions.
Procedures for installing the power analyzer, including power module installation, high-current connections, and bench/rack mounting.
Instructions for connecting the power cord, including safety warnings for fire and shock hazards.
Details on connecting outputs using binding posts, wire sizing, and specific wiring for N678xA SMU and multiple loads.
Instructions for powering on the instrument, including initialization time and front panel controls.
Guides on controlling outputs, setting voltage and current, enabling outputs, and viewing output voltage and current.
Explains how the arbitrary waveform generator function modulates output, defines waveforms with points, and combines Arbs into sequences.
Describes independent protection functions like OV, OC, OT, OSC, PROT, and INH for each output.
Verifies normal operation and published specifications using performance and calibration tests.
Details power module calibration procedures, including voltage, current, resistance, and downprogrammer calibration.
Guides on updating instrument firmware via www.keysight.com/find/N6705firmware, including download and utility steps.
Provides preliminary checkout, overall troubleshooting steps, and specific troubleshooting for bias board, backplane, and calibration issues.
To Next Page
