Calibration
The calibration functions are located in the Administration Tools menu and are password-protected
from unauthorized use. For complete information about calibrating the instrument, refer to the
calibration section.
Sanitize
This procedure is not recommended for use in routine applications because of the
possibility of unintended loss of data.
To erase all user-data from the instrument and restore the factory-shipped settings, log into the
Administrative Tools menu. Then select Sanitize and press the Sanitize button. Refer to Instrument
Sanitize for more information.
Firmware Update
You must use the Firmware Update Utility to update the firmware in your instrument. Refer to
Firmware Update for more information.
You can restrict access to the instrument by the Firmware Update Utility. This prevents unauthorized
users from updating the firmware. Check Login as administrator to allow firmware update.
Keysight N6705C Operating and Service Guide 179
5 Using the System Functions
To Next Page
Loading...
