System features
l Choice of three interfaces - GPIB (IEEE-488), LAN, and USB remote programming interfaces are
built in.
l Built-in Web server - A built-in Web server lets you control the instrument directly from an inter-
net browser on your computer.
l SCPI language - The instrument is compatible with the Standard Commands for Programmable
Instruments (SCPI).
l Savable instrument data - A file management system saves display bitmaps, instrument states,
scope results, arbitrary waveforms, and data log results.
l Memory port - Front USB port allows files to be saved to an external USB memory device.
l Trigger connectors - Rear panel trigger in/out BNC connectors.
l Low acoustic noise - Low acoustic noise for quiet bench operation.
l Universal AC input - Mainframes have universal input voltage capability with active power factor
correction.
Front Panel at a Glance
1. Line switch - Turns the instrument On or Off.
2. Display - Displays all instrument functions - information changes based on selected function.
3. Measure keys - Selects the measurement function - Meter View, Scope View, or Data Logger. Run-
/Stop key starts or stops the scope or data log measurement.
1 Quick Reference
16 Keysight N6705C Operating and Service Guide
To Next Page
Loading...
