EasyManua.ls Logo

Keysight N6705C - Introduction to the Instrument

Keysight N6705C
476 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction to the Instrument
Features at a Glance
Front Panel at a Glance
Rear Panel at a Glance
Meter View
Scope View
Data Logger View
Arbitrary Waveform Preview
Features at a Glance
The Keysight N6705 DC Power Analyzer is a multi-functional power system that combines the
functions of a multiple-output DC voltage source with the waveform/data capturing capability of an
oscilloscope and data logger.
As a multiple-output DC source, the Keysight N6705 provides up to four configurable outputs.
Available power modules have power levels of 20 W through 500 W, have various voltage and current
combinations, and provide a variety of performance features as described under Model Differences.
Each output also has arbitrary (Arb) waveform generation capability, which lets you program
predefined voltage and current waveforms or define your own waveforms. Keysight N678xA
Source/Measure Units (SMU) have a multiple-quadrant power mesh with separate voltage and
current priority source modes.
As a measurement system, the Keysight N6705 displays the average output voltage and current in
Meter View. Waveforms are displayed in Scope View, which you can adjust using vertical and
horizontal controls. The Data Logger View measures and charts average and peak voltage and
current measurements over an extended period.
Source Features
l Color-coded display and output controls - Full programming capability is provided for the entire
range of output voltage and current. Outputs can operate as either constant voltage (CV) or con-
stant current (CC) sources.
l Programmable voltage and current - Full programming capability is provided for the entire range
of output voltage and current for all power modules.
l Low Output Noise - Available on Keysight N676xA and N675xA power modules. Output noise is
<4.5 mV peak-to-peak, which is comparable to linear supplies.
l Fast up/down programming - Available on Keysight N675xA, N676xA, and N678xA SMU power
modules. ≤1.5 millisecond response time from 10% to 90% of the output rating.
1 Quick Reference
14 Keysight N6705C Operating and Service Guide

Table of Contents

Related product manuals