Keysight N6705C - Front Panel Menu Reference

Front Panel Menu Reference
This is an overview of the front-panel menus. For a brief tutorial, refer to Use the Front Panel Menu.
Press the Menu key to access the front panel menus.
Menu Heading Description
Source Settings►
Voltage and CurrentSettings... Configures the voltageand current settings, ranges, and emulation modes.
Protection... Configures the over-voltageand over-currentprotection. Enables output coupling so ALL
outputs are disabled when a faultoccurs. Also clears outputprotection.
Advanced Protection... Enables/disables the outputinhibitfunction.
Output On/Off Delays... Configures output on/off delays.
Output On/Off Coupling... Couples specific outputs for the outputon/off and delay function
Output Grouping... Groups identical outputs for output paralleling function.
Advanced... Configures advanced functions including slewrate, sensing, and power limit.
Ratings... Displays power moduleratings, serial number, firmware, and option information.
Arb►
Arb Preview Displays the present status of the configured arbitrary waveforms.
Arb Selection... Selects arbitrary waveforms for each output. Arb Properties configures the selected Arb.
Meter►
All Outputs Meter View Displays the meter viewof all outputs.
Single Output Meter View Displays the meter view of the selected output.
Meter Properties... Configures the meter view voltage and currentmeasurement ranges.
Scope►
Standard View Displays the standard scope viewincluding vertical, horizontal, and trigger settings.
Marker View Displays the measurement markers and measurement calculations area.
ScopeProperties... Configures the scope traces and voltage and currentmeasurement ranges for individual
outputs. Also configures the trigger source, mode, and horizontal offset.
Marker Properties... Configures the measurements that appear on the bottom of the display in Marker view.
Horizontal Properties... Configures the horizontal offset referenceand samplepoints.
Datalogger►
Standard View Displays the data log strip chart viewincluding vertical, horizontal, and progress settings.
Keysight N6705C Operating and Service Guide 23
1 Quick Reference