Arbitrary Waveform Preview
Press Arb
This dialog displays the
arbitrary waveforms that have
been configured.
Arb Preview
1. DC Value This column indicates the present output voltageor current setting that appears at the outputbefore the Arb is
run. The outputwill return to this valueafter the Arb completeif the Return to DC value box has been
checked. If the Last Arb Value box is checked, the output will remain atthe last programmed Arb value.
2. Output This column identifies the output channel on which the associated waveform will run. Usethe navigation keys
to select an outputif you wish to select an Arb or editthe Arb on that output channel.
3. Waveshapes This column illustrates the waveshapes that will run on each outputwhen the arb(s) arestarted. Note thatall
Arbs will run simultaneously.
4. Trigger Source This dropdown listselects the trigger source for all configured Arbs.
5. Repeat This column indicates how many times the Arb will repeat if ithas been configured to repeat. If the column is
blank, the Arb will only run once.
6. Indicates that the Arb on output 2 runs continuously.
7. 3 Indicates that the Arb on output 3 repeats three times.
8. Time Indicates the time that the longest Arb will run. In this example, all Arbs run the same amountof time.
9. Close Closes the Arb Previewand returns to the previous measurement view.
1 Quick Reference
22 Keysight N6705C Operating and Service Guide
To Next Page
Loading...
