Keysight N6705C - Using the Administrative Tools

Using the Administrative Tools
Administrator Login/Logout
Calibration
Sanitize
Firmware Update
Install Options
Change Administrative Password
To enter the Administrative Utilities menu, press the Menu key, scroll down and select Utilities, then
select Administrative Tools. Access to the Administrative Tools menu is password protected. Select
Administrator Logout/Login to enter the password:
Administrator Login/Logout
If a password is required, enter it in to the PIN field, select the Login button and press [Enter].
As shipped from the factory, the password is 0 (zero). If the PIN field shows 0; simply select the Login
button and press [Enter].
5 Using the System Functions
178 Keysight N6705C Operating and Service Guide