Keysight N6705C - Sine Parameters; Staircase Parameters

Sine Parameters
Parameter Description
Amplitude (I
0
or V
0
) Theamplitudeor peak value.
Offset (I
1
or V
1
) The offsetfrom zero. For power modules that cannot generate negative voltages or currents, the offset can-
not be less than the amplitude.
Frequency (f) The frequency of the sine wave.
From the remote interface:
The amplitude or peak value:
ARB:CURR:SIN:AMPL 1,(@1)
ARB:VOLT:SIN:AMPL 5,(@1)
The offset from zero:
ARB:CURR:SIN:OFFS 1,(@1)
ARB:VOLT:SIN:OFFS 5,(@1)
The frequency of the sine wave:
ARB:CURR:SIN:FREQ 1,(@1)
ARB:VOLT:SIN:FREQ 1,(@1)
Staircase Parameters
3 Using the Source Functions
114 Keysight N6705C Operating and Service Guide