Keysight N6705C - Display Command

Display Command
DISPlay[:WINDow][:STATe] 0|OFF|1|ON
DISPlay[:WINDow}[:STATe?
Turns the front panel display on or off.
Parameter Typical Return
0|OFF|1|ON, defaultOFF 0or1
Turns the front panel display off:DISP OFF
DISPlay[:WINDow]:VIEW METER1|METER4
DISPlay[:WINDow]:VIEW?
Selects the output channel view of the front panel display. METER1 displays one output channel.
METER4 displays all output channels up to a maximum of four.
Parameter Typical Return
METER1 | METER4, *RST METER1 METER1 or METER4
Sets the front panel to display up to four channels: DISPVIEWMETER4
Keysight N6705C Operating and Service Guide 279
7 SCPI Programming Reference