Keysight N6705C Operating and Service Guide
3
Using the Source Functions
Turning the Unit On
Using the Power Supply
Generating Arbitrary Waveforms
Arb Parameter Reference
Using the Protection Functions
This section contains instructions on how to operate your Keysight N6705C
DC Power Analyzer. The specific functions described in this section are listed
above.
Equivalent SCPI commands to program a specific function are included at the
end of each topic. However some functions such as the front panel Scope
View, Data Logger View, and some Administrative functions do not have
equivalent SCPI commands. Command Quick Reference lists all of the SCPI
commands that can be used to program the instrument
To Next Page
Loading...
