Preliminary Information
Check for Items Supplied
Inspect the Unit
Review Safety Information
Observe Environmental Conditions
Check for Items Supplied
Before getting started, check the following list and verify that you have received these items with your
unit. If anything is missing, please contact your nearest Keysight Sales and Support Office.
Mainframe Items Description Part Number
Power Cord A power cord suitable for your location. Call KeysightSales & Support Office
Digital Connector plug 8-pin connector for connecting signal lines to the digital port. Keysight1253-6408
Phoenix ContactMC 1,5/8-ST-3,5
AUX Measurement
Connector plug (2)
8-pin connector plug for the auxiliary measurement inputs.
Only used with Models N6781A and N6785A.
Keysight1253-6408
Phoenix ContactMC 1,5/8-ST-3,5
Spare grommets Two spare grommets for rear panel sense and load wiring. Keysight0400-1009
Automation-Ready CD Contains KeysightIO Libraries Suite. KeysightE2094N
Quick StartTutorial A tutorial to help you quickly get started. KeysightN6705-90005
T-10 Torx tool Tool for installing or removing power modules. Keysight 8710-2416
DC Power Module Items Description Part Number
8 A Output Connector plug One8 A, 8-pin connector plug for connecting power and sense
leads. Only used in Models N678xA SMU.
Keysight1253-6408
Phoenix ContactMC 1,5/8-ST-3,5
12 A Output Connector plug One12 A, 4-pin connector plug for connecting power and
sense leads. Used in all except N6731B, N6741B, N6753A-
N6756A, N6763A-N6766A, N6773A, N678xA SMU.
Keysight1253-5826
Phoenix ContactMSTB 2,5/4-STF
20 A Output Connector plug One20 A, 4-pin connector plug for connecting power and
sense leads. Only used in N6731B, N6741B, N6754A, N6756A,
N6764A, N6766A, N6773A.
Keysight1253-6211
Phoenix ContactPC 4/4-ST-7,62
50 A Output Connector plug One50 A, 2-pin connector plug for connecting power leads.
Only used in N6753A, N6755A, N6763A, N6765A.
Keysight1253-7187
Molex 39422-0002
AUX Measurementconnector
plug
A 2-pin connector plug for connecting the auxiliary meas-
urement inputs. Only used in N6781A and N6785A.
Keysight1253-8485
Phoenix ContactFMC 1,5/2-ST-3,5
Small SenseJumpers Two small jumpers for local sensing at the outputconnector.
Used in all except N6731B, N6741B, N6753A-N6756A,
N6763A-N6766A, N6773A, N678xA SMU.
Keysight8120-8821
Phoenix ContactEPB 2-5(1733169)
2 Installation
48 Keysight N6705C Operating and Service Guide
To Next Page
Loading...
