Note:
- During the processing for previously acquired waveforms, the data is not saved
even if the specified condition is satisfied.
- Depending on the File Type and Limit Count, the size or number of the files to
be saved increases.
2. Push the “Auto Save” ( red circle ) button on the lower left of the display.
The waveforms consistent with the trigger condition are stored up until
the Limit Count set on the “Configuration > Auto Save” window.
This number is counted up until the Limit Count.
The 5 files are created in this sample.
The icon shows the disk usage. When the
free space becomes 10% or less, the color
changes from green to red.
9
To Next Page
Loading...
