Keysight E8257D/67D & E8663D PSG Signal Generators Installation Guide 29
4
Regulatory Information
Statement of Compliance
This product has been designed and tested in accordance with IEC Publication 61010, Safety
Requirements for Electronic Measuring Apparatus, and has been supplied in a safe condition. The
instruction documentation contains information and warnings which must be followed by the user to
ensure safe operation and to maintain the product in a safe condition.
Assistance
Product maintenance agreements and other customer assistance agreements are available for Keysight
Technologies products. For any assistance, contact Keysight Technologies. (Refer to “Contacting
Keysight Sales and Service Offices” on page 11.)
Certification
Keysight Technologies certifies that this product met its published specifications at the time of
shipment from the factory. Keysight Technologies further certifies that its calibration measurements
are traceable to the United States National Institute of Standards and Technology, to the extent
allowed by the Institute’s calibration facility, and to the calibration facilities of other International
Standards Organization members.
Accoustic Statement
This is to declare that this instrument is in conformance with the European Machinery Directive
2002/42/EC, 1.7.4.2u.
Table 4 - 1
Acoustic Noise Emission
LpA < 70 dB
Operator position
Normal operation mode
To Next Page
Loading...
