LED Indicators
The XGS2 chassis provides LED indicators that provide a visual presentation of the operational status of the device
and its individual ports.
LED/LCD Display
The XGS2-SD chassis has front panel LEDs for each load module slot. The following table describes the purpose and
meaning of each indicator:
Label Color Description
Power Green When the Power LED is flashing, the board
is being detected or initialized.
The Power LED is illuminated when the
board is powered.
In Use Amber The Active LED is illuminated when you
have taken ownership of the load module.
If you run traffic from IxExplorer, without
taking port ownership, the In Use light is
not illuminated.
CPU Slot LED Definitions
The specifications of LEDs for the Processor module and the LEDs above the Processor module slot are shown in the
following table:
LED Color Description
On the chassis front
face
CPU card
Slot LED
Yellow The backplane is initializing
Green The backplane has initialized
Processor module -
front panel
Stdby Pwr
LED
Green 5V Stand-by power is available
CPU Pwr
LED
Green CPU Card power is available
HDD Act
LED
Bkpln Link
LED
Green PCIe link to backplane is up
To Next Page
Loading...