SAFETY: Risk of Electrical Shock
CAUTION: Opening or removing the cover of this equipment may expose you to risk of electrical
shock. Components inside these compartments should be serviced only by an Ixia service technician.
l Allow the equipment to cool before removing add-in modules. Add-in modules may become very
warm during normal operation. Use care when removing add-in modules after their continuous
operation.
l To help avoid the potential hazard of electric shock, do not connect or disconnect any cables or
perform maintenance or reconfiguration of your equipment during an electrical storm.
l
SAFETY: Equipment with Laser Devices
CAUTION: Do not look directly into a fiber-optic transceiver or into the end of a fiber-optic
cable. Fiber-optic transceivers contain laser light sources that can damage your eyes.
This equipment may contain optical communications transceivers which have built-in laser devices.
To prevent any risk of exposure to laser radiation, do not disassemble or open any optical transceiver
assembly for any reason.
Protecting Against Electrostatic Discharge
CAUTION: Disconnect product from mains power source in accordance with product-specific
safety information located in this manual.
Electrostatic discharge (ESD) events can harm electronic components. Under certain
conditions, ESD may build up on your body or an object and then discharge into another object, such
as your add-in modules. To prevent ESD damage, you should discharge static electricity from your
body before handling add-in modules.
You can protect against ESD and discharge static electricity from your body by touching a metal
grounded object before you interact with anything electronic. When connecting other devices to this
equipment, you should always ground both yourself and the other device before connecting it to this
Appendix A Safety Instructions
– D –
To Next Page
Loading...