Step 3: Install the Software on the Controller
Keysight M9180 Series Startup Guide 21
LabVIEW development environments. Before this driver can be installed,
your computer must already have the IVI Shared Components installed.
Accept the license terms and click Next.
4 Next, the installer indicates the LabVIEW installations found on your host
computer. Click Next.
5 After accepting the licenses, the driver software is ready to be installed on your
host computer. Click Install.
6 The installation program will take several minutes to finish the installation; do
not cancel the installation process. When the installation wizard is finished,
you will be prompted to reboot your host computer. Do not reboot the host
computer at this time! Select “No, I will restart my computer later.” Power
down the host computer.
Installing Keysight IO Libraries also installs the IVI Shared Components. The IVI
Shared Components are required before IVI drivers (e.g., IVI-COM, IVI-C) can be
installed from the product reference CD.
To Next Page
Loading...
