Step 4: Connect the PC to the PXI Chassis
Keysight M9180 Series Startup Guide 23
Using an embedded computer
Refer to the figure above. If you are using an embedded controller in the PXI
chassis, you should have installed it prior to installing the Keysight IO Libraries
and instrument drivers. No cables or other adapters are required. After
installation, proceed to Step 5: Install the DMM Modules in the PXI Chassis.
M9045A
PCIe Laptop
Adapter
M9021A
System Interface
Module
M9018B
18 Slot PXIe Chassis
Y1202A
PCIe Cable
Y1200A
PCIe Cable
PXIe Embedded
System Controller
M9047A
PCIe Desktop
Adapter
Desktop PC/
Rackmount PC
Laptop PC
System Controller
System Chassis:
System Interface:
To Next Page
Loading...
