Keysight X-Series Signal Generators Error Messages 11
Error Messages
List of Error Messages
-321 Out of memory
*** No documentation ***
-321 Out of memory; Arb file selection failed. File System failed to access
required file. Some table editor files may be corrupted.
There was a problem accessing a required file.
-321 Out of memory; ARB is not functional.
There is insufficient memory for the ARB to generate the requested
waveform.
-321 Out of memory; BBG 3GPP cannot function properly.
3GPP cannot function properly due to dynamic memory allocation
failure.
-321 Out of memory; Burst shape subsystem unable to operate.
Operations on a Burst Shape could not be completed because of
insufficient memory.
-321 Out of memory; Cannot convert binary file to bit file.
There is not enough memory to convert a binary file to a bit file.
Reduce the size of any sweep lists and try again.
-321 Out of memory; Cannot precalculate frequencies. Try fewer frequencies.
To Next Page
Loading...
Need help?
General
