Keysight N5172B EXG - Page 37

Keysight X-Series Signal Generators Error Messages 37
Error Messages
List of Error Messages
Please select an existing file before trying to use PRAM.
No file has been selected for use as the PRAM file. Please select
an existing file before trying to use PRAM.
-257 File name error; Waveform file not selected.
Waveform file or sequence file must be selected when turning ARB
on.
-257 File name error; {name}
There was a problem with the specified file name. Check the syntax
and try again.
-256 File name not found; User preset file could not be found: a user
preset state must be saved before the preset type can be set to User.
The instrument could not find a user-saved preset state. The user
must first save a preset state before the Preset Type can be set to
User.
-256 File name not found; {name}
The file specified does not exist.
-256 File name not found; {name} The burst shape type has been defaulted.
The specified file does not exist, so the burst shape type has been
defaulted.
-256 File name not found; {name} The filter type has been defaulted.