38 Keysight X-Series Signal Generators Error Messages
Error Messages
List of Error Messages
The specified file does not exist or is not a filter file type so
the filter type has been defaulted.
-256 File name not found; {name} The modulation type has been defaulted.
The specified file does not exist, so the modulation type has been
defaulted.
-255 Directory full; {name}
A legal program command or query could not be executed because the
media directory was full.
-254 Media full; Could not convert file to normalized secure form: {name}
If a secure file is written in three parts to the non-volatile
storage, extra storage (2 times the total size of the files) is
required to complete the write operation. If there is insufficient
memory, the file cannot be written.
-254 Media full; Could not resample IQ waveform {name}
The resample operation could not be performed because there is not
enough memory left on the baseband board: the resampled file to be
written is too big to fit on the media. The original file is
untouched. Delete any files that were previously downloaded but are
not required anymore (e.g. Arb waveform files). Upgrade to a
baseband option with larger memory.
-254 Media full; {name}
To Next Page
Loading...
