Keysight X-Series Signal Generators Error Messages 111
Error Messages
List of Error Messages
TODO: Parameter is a string containing illegal character.
-102 Syntax error; Bad compatibility language token {name}
In 8656/57 compatibility mode, a known command or termination
specifier was received when it was not expected. For example, a
termination specifier was received with no currently active
function. TODO: Parameter is a string containing illegal token
-101 Invalid character
A syntactic command contains a character that is invalid for
that type. For example, a header containing an ampersand,
SETUP&. This error might be used in place of error
numbers -114, -121, -141 and some others.
-100 Command error
This is a generic syntax error for devices that cannot detect
more specific errors. The code indicates only that a command
error as defined in IEEE 488.2, 11.5.1.1.4 has occurred.
-100 Command error; AM compatibility command is not available while in
mixed modulation mode.
While in 8662 compatibility mode, AM is not available while mixed
modulation is active (SP41 or SP42) To control the AM modulation
first turn off mixed modulation mode (SP40).
-100 Command error; IL: Not a valid learn string.
In 8340 compatibility mode, IL was received via GPIB. The
To Next Page
Loading...
