Keysight N6751A - Page 8

8
Module Memory
This section contains information on the types of memory available in your module. It explains the
size of memory, how it is used, its location, volatility, and the clearing or sanitization procedure.
Table1: Memory Summary For Model
N6731B, N6732B, N6733B, N6734B, N6735B, N6736B
N6741B, N6742B, N6743B, N6744B, N6745B, N6746B
N6751A, N6752A, N6753A, N6754A, N6755A, N6756A
N6761A, N6762A, N6763A, N6764A, N6765A, N6766A
N6773A, N6774A, N6775A, N6776A, N6777A, N6783A
Memory Type
and Size
Writable Dur
ing Normal
Operation?
Data Retained When
Powered Off?
Purpose/ Contents Data Input
Method
Location in
Instrument and
Remarks
Clearing or
Sanitization
Procedure
EEPROM
Note 1
16K-bit
No Yes
Used to store,
Model Number
Serial Number
Calibration data.
Calibration Date
Programmed
before installed
and by Firmware
operations (cal
routines)
Main PCA See Table 4
and
See Table 5
FPGA
146KB - 195KB
No No
Power module
measurement and control
infrastructure
Programmed
During power up
in Mainframe
DPM Power Cycle
Notes
1.
When module is used in Mainframes N6700B, N6701A, N6702A, N6705B EEPROM also stores saved states. See
Table 6 on how to clear in these mainframes.