Need help?Do you have a question about the Keysight E36300 Series and is the answer not in the manual?
General| Number of Outputs | 3 |
|---|---|
| Output 2 Voltage | 25 V |
| Output 3 Voltage | -25 V |
| Output 3 Current | 1 A |
| Output Current | 0 to 5 A |
| Output Voltage Range | 0 to 25 V |
| Output Current Range | 0 to 5 A |
| Current Programming Accuracy | 0.1% + 5 mA |
| Readback Accuracy (Voltage) | 0.05% + 5 mV |
| Load Regulation | 0.01% + 2 mV |
| Line Regulation | 0.01% + 2 mV |
| Interface | LAN, USB, GPIB |
Covers physical setup, connection, and initial installation procedures.
Details instrument options and correct fuse selection based on input voltage.
Instructions for connecting power, outputs, and interface cables to the instrument.
Guide to configuring USB, LAN, and GPIB interfaces for remote instrument control.
Explains how to control the instrument via SCPI or its web interface.
Detailed instructions on selecting, setting, and enabling instrument outputs.
How to configure and manage over-voltage and over-current protection features.
How to create and run output sequences using the Output LIST feature.
Guide to logging voltage and current data using the instrument's data logger.
To Next Page
