Keysight E36300 Series User Manual

DHCP allows DHCP assignment of the instrument’s IP address. It also enables the configuration of network
parameters based on the protocol selected. DHCP On automatically assign a dynamic IP address to a LAN device.
AutoDNS allows assignment of the DNS addresses. AutoDNS On automatically configures the addressing of the
instrument in DNS server
mDNS allows modification of the mDNS Service Name.
Hostname allows modification of the instrument's DNS hostname.
Digital IO (E36312A and E36313A only)
Digital IO configures the rear panel digital port's pin function, polarity and output data applied to the pin.
Pin selects the pin for configuration.
Functions configures the function for each pin as shown below.
Polarity configures the polarity to Positive (POS) or Negative (NEG) for the selected pin.
Out enables (1) or disables (0) the output data for the selected pin.
GPIB (optional and applicable to E36312A and E36313A only)
GPIB allows you to set the GPIB address to a value from 0 to 30. After changing the address, cycle instrument power
for the change to take effect.
Keysight E36300 Series User's Guide 99

Keysight E36300 Series Specifications

General

Brand	Keysight
Model	E36300 Series
Category	Power Supply
Language	English