Need help?Do you have a question about the Keysight E3631A and is the answer not in the manual?
General| Output Channels | 3 |
|---|---|
| Output Voltage Range | +6V, +25V, -25V |
| +6V Output Current | 5 A |
| +25V Output Current | 1A |
| -25V Output Current | 1A |
| Power Output | 80 W |
| Power Rating | 80 W |
| Ripple & Noise (VRMS) | 1mVrms |
| Ripple and Noise | 1mVrms |
| Load Regulation | 0.01% + 5mV |
| Line Regulation | 0.01% + 5mV |
| Operating Temperature Range | 0 to 50°C |
| Storage Temperature Range | -40 to 70°C |
| Weight | 3.2 kg |
| Output Voltage | 6V, 25V, -25V |
| Ripple and Noise (20Hz to 20MHz) | 1mVrms |
| Ripple & Noise (Vpp) | 5mVpp |
| Dimensions | 210 x 88 x 370 mm |
Legal notice regarding reproduction and rights.
Information on product conformity declarations.
Rights for U.S. government use of software.
Explanation of safety symbols used in the documentation.
Explanation of various regulatory compliance marks and their meaning.
Information on how to get sales and technical assistance.
Detailed performance metrics and parameters of the power supply.
Non-warranted performance characteristics of the power supply.
Steps to verify the power supply is ready for initial operation and basic checks.
Guide to operating in constant voltage, constant current, and track modes.
List of recommended equipment for performance verification and calibration.
Tests to verify power supply specifications after repairs or for general checks.
How to manage security codes and perform general calibration.
High-level overview of the power supply's architecture and main blocks.
Details on power input, line selection, and internal bias voltage generation.
Explanation of the main controller, logic, and regulation circuits.
Items to check before returning the unit for service or repair.
Common failures, error codes, and guidelines to prevent ESD damage.
Diagrams showing component locations on main and front panel boards.
To Next Page