Keysight E3631A Service Guide 3
Certification
Keysight Technologies certifies that this product met its published specifications
at the time of shipment. Keysight further certifies that its calibration
measurements are traceable to the United States National Institute of Standard
and Technology (formerly National Bureau of Standards), to the extent allowed by
that organization’s calibration facility, and to the calibration facilities of other
International Standards Organization members.
Warranty
This Keysight product is warranted against defects in materials and workmanship
for a period of one year from date of shipment. Duration and conditions of
warranty for this product may be superseded when the product is integrated into
(becomes a part of) other Keysight products.
During the warranty period, Keysight will, at its option, either repair or replace
products which prove to be defective. The warranty period begins on the date of
delivery or on the date of installation if installed by Keysight.
Warranty Service
For warranty service or repair, this product must be returned to a service facility
designated by Keysight. For products returned to Keysight for warranty service,
the Buyer shall prepay shipping charges to Keysight and Keysight shall pay
shipping charges to return the product to the Buyer. However, the Buyer shall pay
all shipping charges, duties, and taxes for products returned to Keysight from
another country.
To Next Page
Loading...
Need help?
General
