Need help?Do you have a question about the Keysight E3633A and is the answer not in the manual?
General| Output Voltage Range (Channel 1) | 0 to 8 V |
|---|---|
| Output Current Range (Channel 1) | 0 to 20 A |
| Output Voltage Range (Channel 2) | 0 to 25 V |
| Number of Outputs | 3 |
| Operating Temperature Range | 0 to 50 °C |
| Storage Temperature Range | -40 to 70 °C |
| Ripple and Noise (20 Hz to 20 MHz) | 2 mV RMS |
| Load Regulation | 0.01% + 2 mV |
| Line Regulation | 0.01% + 2 mV |
Illustrates and explains symbols indicating safety precautions.
Essential safety precautions for all phases of instrument operation and repair.
Highlights critical safety warnings like grounding and explosive atmospheres.
Details product compliance with safety and EMC directives and standards.
Covers initial inspection, checks, cooling, location, and rack mounting.
Steps to verify supplied items, voltage setting, and fuse installation.
Checks instrument functionality via self-test and display after power-on.
Procedures to verify voltage and current output functions and response.
Steps to check basic voltage functions with no load connected.
Procedure for setting up and operating the supply in Constant Voltage mode.
Procedure for setting up and operating the supply in Constant Current mode.
Setting OVP trip levels, enabling the circuit, and clearing conditions.
Setting OCP trip levels, enabling the circuit, and clearing conditions.
Lists and briefly describes SCPI commands for programming the power supply.
Lists and describes error codes related to command execution and syntax.
Identifies errors that may occur during instrument self-testing.
Lists and explains error codes related to the calibration process.
Detailed specifications for output ratings, accuracy, ripple, and regulation.
To Next Page
