Quick Start 2
Keysight E3631A Service Guide 45
To rack mount the power supply
The power supply can be mounted in a standard 19-inch rack cabinet using one of
three optional kits available. A rack-mounting kit for a single instrument is
available as Option 1CM (P/N 5062-3957). Installation instructions and hardware
are included with each rack-mounting kit. Any Keysight Technologies System II
instrument of the same size can be rack-mounted beside the Keysight E3631A
power supply. To rack mount the power supply, follow these procedures.
Remove the front and rear bumpers before rack-mounting the power supply.
Front
Rear (bottom view)
To Next Page
Loading...
