Data logger view
Press Data Logger from the soft front panel menu.
Item Description
1 Trace controls
Identifies the voltage or current trace that will be displayed. Dashes (----) indicate that the specified trace is turned off. Select the
trace and press [Enter] to turn it on or off.
2 Output traces
Voltage, current, or power traces. Voltage traces V1,V2 and V3 is shown. Press Auto Scale to auto scale all traces.
3 Status
Indicates whether the Data Logger is logging data, done logging, or is empty.
4 Filename
Indicates the file to which the data is being logged.
5 Data bar & time elapsed
Displays the progress of the data logger. The yellow bar indicates the visible data. Numbers to the right indicate time elapsed/total
duration.
6 Time/Div
Indicates the horizontal time-base setting.
7 Offset time
Indicates the time that the right gridline is offset or away from the end of the data log.
8 Grid time
Displays the time on the gridline
20
Keysight E36300 Series User's Guide
To Next Page
Loading...
