Keysight E36300 Series User Manual

Prepare Instrument for Use
Initial inspection
When you receive your power supply, inspect it for any obvious damage that may have occurred during shipment. If
there is damage, notify the shipping carrier and nearest Keysight Sales and Support Office immediately. Refer to
www.keysight.com/find/assist.
Until you have checked out the power supply, save the shipping carton and packing materials in case the unit has to
be returned. Check the list under Standard Shipped Items and verify that you have received these items with your
instrument. If anything is missing, please contact your nearest Keysight Sales and Support Office.
Standard shipped items
– Keysight E36311A/E36312A/E36313A DC power supply
– AC power cord
– Certificate of calibration
– One connector kit (P/N: E36312-89001) (E36312A and E36313A only):
– One 10 A, 3.5 mm female 4-pin terminal block connector
– One 12 A, 5 mm female 4-pin terminal block connector
– One 12 A, 5 mm female 8-pin terminal block connector
Documentation and firmware revisions
The Keysight E36300 Series documentation listed below can be downloaded for free through our website at
www.keysight.com/find/e36300manuals.
– Keysight E36300 Series programmable DC Power Supplies User's Guide. This manual.
– Keysight E36300 Series programmable DC Power Supplies Programming Guide.
– Keysight E36300 Series programmable DC Power Supplies Service Guide.
For the latest firmware revision and firmware update instruction, go to www.keysight.com/find/e36300firmware.
Recommended calibration interval
Keysight Technologies recommends a one year calibration cycle for the E36300 Series programmable DC power
supplies.
22
Keysight E36300 Series User's Guide

Keysight E36300 Series Specifications

General

Brand	Keysight
Model	E36300 Series
Category	Power Supply
Language	English