Table Of Contents
6.9.3 Apply Cal Group 2213
6.9.4 All Apply Cal Group Off 2213
6.9.5 Connection 2214
6.10 Calibrator Control 2215
6.10.1 Select Cal Source 2215
6.10.2 Cal Output 2215
6.10.3 Cal Frequency 2216
6.10.4 Cal Signal Type 2216
6.10.5 Cal Comb Spacing 2216
6.10.6 Calibrator Reference 2217
6.11 Advanced 2218
6.11.1 T/R Port High Power Attenuator 2218
6.12 Aux I/O Control 2220
6.12.1 Data 0 – Data 7 2220
6.12.2 Aux IO Control (Remote Command Only) 2220
7 Save/Recall/Print 2221
7.1 Quick Save 2222
7.2 Recall 2225
7.2.1 Recall From File / Open 2226
7.2.2 State 2227
7.2.3 Recall Type 2228
7.2.4 Register 1 thru Register 16 2229
7.2.5 Edit Register Names 2230
7.2.6 Trace+State 2230
7.2.7 Recall To Trace 2231
7.2.8 Register 1 thru Register 16 2231
7.2.9 Edit Register Names 2232
7.2.10 Screen Config + State 2232
7.2.11 Measurement Data 2233
7.2.12 Data Type 2233
7.2.13 Trace 2233
7.2.14 Limit 2234
7.2.15 Select Limit 2235
Short Range Comms & IoT Mode User's &Programmer's Reference 69
To Next Page
Loading...
