Table Of Contents
7.2.16 Correction 2235
7.2.17 Select Correction 2236
7.2.18 Complex Correction 2236
7.2.19 Select Complex Correction 2237
7.2.20 Recall VDI CCD Correction 2237
7.2.21 Mask 2238
7.2.22 Sequence 2238
7.2.23 Waveform 2238
7.2.24 Load Segment to ARB Memory 2240
7.2.25 Delete Segment From ARB Mem 2241
7.2.26 Delete All From ARB Memory 2242
7.2.27 Set Default Directory (Remote Command Only) 2242
7.2.28 Query ARB Memory File List (Remote Query Only) 2242
7.2.29 Query ARB Memory Full File List (Remote Query Only) 2243
7.2.30 Power Sensor Cal Factor 2243
7.2.31 Recording 2244
7.2.32 Data Type 2245
7.2.33 Channel 2245
7.2.34 Reset 2246
7.2.35 Recalled data channel table (Display only) 2246
7.2.36 CC Setup 2246
7.2.37 Frame Index (.scp and .pwsg only) 2247
7.2.38 Close VSA after recall (.setx only) 2247
7.2.39 Custom IQ Constellation State 2248
7.2.40 Memory Polynomial and Volterra Coefficients Files 2248
7.2.41 Sample file 2248
7.2.42 Coefficient Lengths 2251
7.2.43 How to apply the coefficients to signal 2251
7.2.44 Loss Comp 2252
7.2.45 Data Pattern 2253
7.2.46 Signal Configuration 2253
7.3 Save 2255
7.3.1 Save to File / Save As 2256
70 Short Range Comms & IoT Mode User's &Programmer's Reference
To Next Page
Loading...
