Table Of Contents
8.3.9 Gate View Start Time 2374
8.3.10 Gate Delay Compensation 2375
8.3.11 Min Fast Position Query (Remote Query Only) 2376
8.3.12 Gate Preset (Remote Command Only) 2377
8.3.13 Gate Level (Remote Command Only) 2377
8.3.14 Gate Polarity (Remote Command Only) 2377
8.4 Enables the hardware accelerated stepped FFT gating feature
(Display only) 2379
8.5 Periodic Sync Src 2380
8.5.1 Select Periodic Timer Sync Source 2380
8.6 Auto/Holdoff 2381
8.6.1 Trig Holdoff 2381
8.6.2 Auto Trig 2381
8.6.3 Holdoff Type 2382
9 Programming the Instrument 2384
9.1 List of Supported SCPI Commands 2385
* 2385
A 2385
C 2386
D 2393
F 2396
H 2396
I 2396
L 2398
M 2398
O 2399
R 2399
S 2400
T 2420
U 2421
9.2 IEEE 488.2 Common Commands 2422
9.2.1 *CAL? - Calibration Query 2422
9.2.2 *CLS - Clear Status 2423
Short Range Comms & IoT Mode User's &Programmer's Reference 75
To Next Page
Loading...
