Keysight U1177A IR-to-Bluetooth Adapter
Operating Instructions
The Keysight U1177A IR-to-Bluetooth
®1
adapter is designed for use with Keysight Wireless
Remote Connectivity (WRC) compatible handheld meters only, where it allows Bluetooth
communication between the meter and PC. The U1177A is powered by two AAA batteries, is
able to operate for about 30 hours (with new alkaline batteries), and provides connectivity up to
a radius of 10 metres. (refer to http://www.keysight.com/nd/U1177A for a comprehensive list
of WRC-compatible handheld meters)
Front View
LED Indicator and Slide Switch
Low battery — LED red ashing
1. Bluetooth disconnected — LED green ashing
2. Bluetooth connected — LED solid green
3. Bluetooth power off — LED off
Slide switch
Standard Shipped Items Checklist
The following items are included when you make a purchase:
• U1177A IR-to-Bluetooth adapter
• Two 1.5 V AAA batteries
• Operating Instructions (this sheet)
Assistance
For technical assistance, contact your nearest Keysight Sales Ofce or visit the Keysight website
at www.keysight.com/nd/assist for further information.
1
The Bluetooth
®
word mark and logos are registered trademark owned by Bluetooth SIG, Inc and any use of such
marks by Keysight is under license. Other trademark and trade names are those of their respective owners.
To Next Page
General