4 Keysight U1271A/U1272A Quick Start Guide
4 Keysight U1271A/U1272A Quick Start Guide
ENGLISH
Differences between the U1271A and U1272A
The U1272A model offers these additional
functions:
–Z
LOW
(low input impedance) measurements
– Smart Ω measurements
–Auto-diode tests
– AC+DC voltage and current measurements
– J-type thermocouple temperature
measurements
– 30 Ω and 300 MΩ ranges for resistance
measurements
– dBm and dBV measurements with selectable
impedance
– Data logging up to 10,000 memories
The U1271A model has one differing function:
– Qik-V tests
Install the Batteries
Your multimeter is powered by four 1.5 V AAA
alkaline batteries (included with the shipment).
1 Turn the rotary switch to OFF
and remove the test leads
from the terminals.
2 Lift the tilt stand and loosen
the screws with a suitable
Phillips screwdriver.
3 Remove the battery cover and observe the
polarity markings.
4 Insert the batteries and replace the battery
cover and screws.
To Next Page
Loading...
