Need help?Do you have a question about the Keysight 34450A and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Model | 34450A |
| Manufacturer | Keysight |
| Display Digits | 5.5 |
| Display | LCD |
| DC Voltage Range | 100 mV to 1000 V |
| Max Voltage | 1000 V |
| AC Voltage Range | 100 mV to 750 V |
| DC Current Range | 100 μA to 10 A |
| Max Current | 10 A |
| AC Current Range | 100 μA to 10 A |
| Resistance Range | 100 Ω to 100 MΩ |
| Frequency Range | 20 Hz to 300 kHz |
| Continuity | Yes |
| Diode Test | Yes |
| Interface | USB, GPIB (optional) |
| Capacitance Range | 1 nF to 10 mF |
| DC Current Accuracy | 0.05% + 5 counts |
| AC Current Accuracy | 0.3% + 0.05% |
| Frequency Accuracy | 0.01% + 1 count |
| Resolution | 100 nV |
Covers warranty terms, technology licenses, and government rights for software and data.
Explains CAUTION, WARNING notices, and safety symbols for instrument operation.
Explains compliance marks like CE, CSA, WEEE, and C-tick.
Details operating temperature, humidity, altitude, and pollution degree requirements.
Information on WEEE directive and proper disposal of electrical/electronic products.
Defines protection limits for the instrument's input and sense terminals.
Explains Category II overvoltage protection for mains connections.
Details specifications and usage of test lead attachments.
Provides guidance on inspecting and replacing test leads.
Covers calibration overview, interval, and time requirements.
Lists recommended equipment, test conditions, and input connections.
Introduces different levels of verification tests including self-test and detailed tests.
Explains security, unsecuring, and the overall calibration procedure.
Details the process for making instrument adjustments.
Covers storing messages and handling calibration errors.
Lists pre-service checks for multimeter operability.
Describes warranty, extended service contracts, and repair options.
Provides instructions for safely shipping and cleaning the instrument.
Guides on replacing the power line fuse and current input fuses.
Explains how to check installed instrument options and licenses.
Lists and explains error codes generated during self-tests.
Outlines essential precautions to prevent ESD damage during servicing.
Provides detailed steps for disassembling the instrument.
Lists available parts for replacement with part numbers.
Describes how to mount the multimeter in a standard 19-inch rack cabinet.
To Next Page
