Keysight 34450A - Test Lead Information; Test Lead Ratings and Operation; Test Lead Maintenance

X 34450A Service Guide
Additional Notices
The Keysight 34450A is provided with a Keysight 34138A Test Lead Set,
described below.
Test Lead Ratings
Test Leads - 1000 V, 15 A
Fine Tip Probe Attachments - 300 V, 3 A
Mini Grabber Attachment - 300 V, 3 A
SMT Grabber Attachments - 300 V, 3 A
Operation
The Fine Tip, Mini Grabber, and SMT Grabber attachments plug onto the
probe end of the Test Leads.
Maintenance
If any portion of the Test Lead Set is worn or damaged, do not use. Replace
with a new Keysight 34138A Test Lead Set.
WARNING
If the Test Lead Set is used in a manner not specified by Keysight Technologies, the
protection provided by the Test Lead Set may be impaired. Also, do not use a
damaged or worn Test Lead Set. Instrument damage or personal injury may result.