To Next Page
C
Christopher JonesSep 8, 2025
How to fix looseness in Ki Mobility Mobility Aid chair?
- KKevin JamesSep 8, 2025
To address looseness in your Ki Mobility Mobility Aid chair, ensure that all fasteners are tightened.
How to fix looseness in Ki Mobility Mobility Aid chair?
To address looseness in your Ki Mobility Mobility Aid chair, ensure that all fasteners are tightened.
What to do if Ki Mobility Mobility Aid will not tilt or rattles when tilting?
If your Ki Mobility Mobility Aid chair will not tilt or rattles when tilting, ensure all tire pressures are correct and equal on both sides of the chair. Also, make sure all fasteners are tightened. Apply a Teflon® based lubricant (such as Tri- Flow®) between modular frame components. Ensure the cable/foot tilt mechanism is adjusted and cogs disengage teeth. Inspect roller bearings for wear and replace if necessary. Inspect rotary frame bearing surfaces for damage and clean as necessary. Finally, optimize the CG setting.
Why is my Ki Mobility Mobility Aid sluggish in turning?
If you notice sluggishness when turning your Ki Mobility Mobility Aid, try adding a spacer washer between the caster stem and the bottom caster housing bearing on either the left or right side of the chair.
What causes caster flutters in Ki Mobility Mobility Aid?
Caster flutters in your Ki Mobility Mobility Aid can be due to tire pressure issues. Ensure all tire pressures are correct and equal on both sides of the chair.
General| Product Category | Wheelchair |
|---|---|
| Brand | Ki Mobility |
| Model | Focus CR |
| Frame Type | Folding |
| Material | Aluminum |
| Weight Capacity | 250 lbs |
| Frame Material | Aluminum |
| Folding | Yes |
| Adjustable Backrest | Yes |
| Adjustable Footrest | Yes |
| Seat Depth | 14" - 20" |
| Weight | 28 lbs |
| Wheel Size | 24" |
Discusses factors affecting wheelchair safety and stability.
Defines DANGER, WARNING, and CAUTION terms used in the manual.
Covers general safety precautions and weight limits for wheelchair use.
Guidelines for the proper and safe use of positioning belts.
Instructions and warnings for safe operation on various surfaces.
Advisory regarding the use of power drive systems with the wheelchair.
Procedures and safety precautions for ascending stairs with the wheelchair.
Procedures and safety precautions for descending stairs with the wheelchair.
Safety advice and procedures for transferring into or out of the wheelchair.
Warnings about environmental factors affecting wheelchair durability and safety.
Instructions and warnings against unauthorized modifications to the wheelchair.
Explains factors affecting wheelchair stability and safe adjustments.
Identifies and illustrates the various parts of the Focus CR wheelchair.
Guidelines for safely using the wheelchair as a seat in a motor vehicle.
Instructions for installing, adjusting, and removing height adjustable T-arms.
Steps for installing, adjusting, flipping, and removing dual post armrests.
Instructions for adjusting and using angle adjustable flip-up armrests.
Critical safety warnings related to the use and lifting of armrests.
Procedures for installing, swinging away, and removing swing away hangers.
Details on installing, using, and rotating swing away hangers with a 4-way latch.
Instructions for adjusting extension tubes for footrests to ensure proper height.
Guidance on installing, removing, and adjusting elevated leg rests.
Instructions for installing and adjusting the Pro Elevated Leg Rest.
Procedures for folding, adjusting angle, and adjusting height of the backrest.
Operation and safety guidelines for the reclining backrest mechanism.
Instructions for operating and adjusting the hand-operated and foot-operated tilt mechanisms.
Steps for setting seat depth and optimizing the center of gravity (CG).
Instructions for adjusting caster arm position and caster height.
Procedures for adjusting axle plate position, sleeve height, and axle spacing.
Guidance on installing, adjusting, and removing rear wheels.
Instructions for adjusting and reversing wheel lock mounts and foot pedal angle.
Details on drum brake operation, adjustment, and axle sleeve position.
Steps for adjusting the overall frame width of the wheelchair.
Instructions for flipping, removing, and setting the height of anti-tip devices.
Procedures for removing, installing, adjusting length and width of the seat pan.
Recommended procedure for bearing replacement, best performed by a technician.
Instructions for use and transit use of the vent and battery tray.
Instructions for securely attaching and using the oxygen tank holder.
Guidelines for general inspections of the wheelchair's components.
Outlines weekly, monthly, and annual maintenance tasks for the wheelchair.
Instructions for cleaning the axles, wheels, and caster housings.
Recommendations for storing the wheelchair when not in use.
Lists common symptoms and suggested solutions for troubleshooting the wheelchair.
Details Ki Mobility's warranty coverage, limitations, and responsibilities.
