Kia D9062 ADUP0 - Mirror and Overhead Console Removal

Genuine Accessories
#2 Phillips Screwdriver
N
O
T
E
9
T20 Torx Driver
N
O
T
E
CAUTION: Take care to avoid damaging the mirror mount,
windshield, and headliner.
1. Using a T20 Torx Driver, loosen the screw on the mirror mount.
2. Gently pull the mirror upwards in a parallel direction to the windshield.
DO NOT pull the mirror away from the windshield.
N
O
T
E
N
O
T
E
1. Remove the fuse panel cover, and set aside.
10
1. Reach through the fuse panel opening and push the Dash Side Panel out,
by dislodging the five (5) clips.
2. Remove the Dash Side Panel and set aside.
1. Open sunglass holder in the overhead console, exposing two (2)
Philips screws, and with a #2 Philips screwdriver, remove them.
2. Remove the overhead console by pulling downward starting from
the side closest to the windshield. Continue rocking side-to-side,
until the console comes free of the retaining hooks.
3. Disconnect any electrical connectors and place the console aside.
11
Nylon Panel Removal Tool
CAUTION: Do not damage headliner or overhead console.
12
*550-0670-000*
550-0670-000 Rev. 004
Revision Date
11/23/2015
Page 6 of 17