Features of your vehicle
824
Headlight position ( )
When the light switch is in the headlight position (2nd position),
the head, tail position, license and instrument panel lights are
ON.
✽✽
NOTICE
The ignition switch must be in the ON position to turn on the
headlights.
Auto light position (if equipped)
When the light switch is in the AUTO light position, the taillights
and headlights will be turned ON or OFF automatically depend-
ing on the amount of light outside the vehicle.
■ Type A
■ Type B
OBK049047N/OAM049042/OAM049042R/OAM049042R-1
■ Type C
■ Type D
■ Type A
■ Type B
OFS040084/OFS040084R
CAUTION
• Never place anything over sensor (1) located on the
instrument panel, this will ensure better auto light sys-
tem control.
• Don’t clean the sensor using a window cleaner, the
cleanser may leave a light film which could interfere
with sensor operation.
• If your vehicle has window tint or other types of metal-
lic coating on the front windscreen, the Auto light sys-
tem may not work properly.
To Next Page
