311
Safety features of your vehicle
To fold the rear seat:
The rear seatbacks may be folded for-
ward to provide additional cargo space
and to provide access to the cargo area.
• To raise the seatback, lift and push it
firmly until it clicks into place.
• When you return the seatback to its
upright position, reposition the rear
safety belts so that they can be used
by rear seat passengers.
1. Insert the rear seat belt buckle in the
pocket between the rear seatback and
cushion.
2. Insert the rear seat belt metal tab into
the holder to prevent the seat belt form
being damaged.
3. Set the front seatback to the upright
position and if necessary, slide the
front seat forward.
4. Lower the rear headrests to lowest
position.
CAUTION
• When folding or unfolding the
rear seat, make sure to move the
front seat fully forward. If there
are not enough space to fold the
rear seat, never fold it by force. It
will cause damage to the head-
rest or the related parts of the
seat.
• Before using the seat belt, be
sure to remove it from the holder.
If you pull out the seat belt whilst
it's in the holder, it may damage
the seat belt or holder.
• Use the holder only when there is
no passengers in the rear seat or
when you need to fold the rear
seat.
WARNING
Do not fold the rear seat, if the dri-
ver's position is not properly set
according to the driver's physical
figure after folding the rear seat. A
sudden stop or collision may cause
injury.
OTA030013
To Next Page
Loading...
