Kicker BF100 User Manual

3
Input Status:
Audio input status is indicated with one of two colored LEDs, located above the PAIR button.
These LEDs will change color with the source:
Bluetooth - Blue Auxiliary Input - Green
Status Indicators
The KICKER Bullfrog uses light indicators to acknowledge changes in settings, modes,
and input response. If no action can be taken, such as decreasing volume when at minimum,
or pressing FWD/BACK while in AUX mode, there will be no response.
Battery Status:
Battery status is indicated with 5 white LEDs above the PAIR button. These LEDs will also in-
dicate Double-Kick mode (see Page 4). To show current battery status, press any button while
the Bullfrog is powered on. Status display will end after 5 seconds. Remember to charge the
Bullfrog for 6 hours before fi rst use. Charging is complete when Battery LEDs stop counting
and turn off.
{
BATTERY STATUS LEDs (1-5)
Off Full Charge
All Solid >80%
4 Solid 60%–80%
3 Solid 40%–60%
2 Solid 20%-40%
1 Solid <20%
1 Blinking <10%
Counting Up Battery Charging
AUX
}
LED status indicators:
• illuminated when the Bullfrog is powered on
• solid when input source is set
• fl ashes blue when in Bluetooth pairing mode
• blinks when receiving commands
• breathes slowly when audio is paused or muted

Kicker BF100 Specifications

General

Brand	Kicker
Model	BF100
Category	Stereo System
Language	English